Feature:1. 0.96IN DISPLAY SCREEN: Mini automatic antenna tuner, with 0.96in organic light emitting diode display, support USB charging.2. EASY OPERATION: This automatic antenna tuner case requires no assembly and is developed by N7DDC for automatic tuning.3. EXCELLENT COMPONENTS: Using excellent 1000V high voltage SMD capacitor, C channel capacitor, and advanced PIC chips.4. VOLTAGE AND FREQUENCY: The working voltage is 1015VDC, the working frequency range is 1.855 MHz, and the application range is wide.5. ALUMINUM ALLOY: Made of aluminum alloy material, light weight and corrosion resistance, has good heat dissipation effect.Specification:Item Type: Mini Antenna TunerMaterial: Aluminum AlloyModel: ATU-100Working Voltage: 10-15VDCDisplay: 0.96in Organic Light Emitting DiodeOperating Frequency: 1.8-55 MHzBattery Model: 1350mAh 3.6V lithium battery (built in battery)USB Charging Current: 1AMaximum Working Power: 100WMaximum Measurement Power: 150WTuning Start Minimum Power: 1WMinimum Measurement Power: 0.1WStep for Measuring Power Below 10W: 0.1WStep for Measuring Power Above 10W: 1WPower Measurement Accuracy: 10%Maximum Setting Inductance: 8.4uHInductance Minimum Setting Step: 0.05HMaximum Setting Capacity: 1870pF capacitorMinimum Setting Step: 10pF.Package List:1 x Antenna Tuner1 x USB Cable Note:1. Insufficient adjustment may occur within 5W, so do not lower than 5W.2. It is recommended that the maximum power should not exceed 30W during tuning. (It can be set to 100W after tuning, and work at this power, otherwise it is easy to burn)3. You need to use 9‑12V to start the ATU‑100. If you use a power bank or computer USB port to output power, you cannot start the ATU‑100 because their voltage is too low.