DIY Crystal Epoxy Storage Box Mold Rhombus Mirror Manual Hexagon Storag feature: Material: The art resin mold is made of silicone resin, which is very soft, easy to clean, reusable and not easy to damage. When the project is executed, it will transparently check the project process at any time. Easy to release: The interior is smooth and shiny, reducing the need for cutting and polishing. After the project is fully cured, it is easy to pull out the fully cured resin product. After that, you can use mold release spray, which can help you extend the life of your mold. Wide range of uses: very suitable for making cabochons, plexiglass, hanging ornaments, home decorations, pendulums, artworks, etc. Can be used with epoxy, wax, soap and other materials. Storage and maintenance: Please store the resin mold at room temperature and avoid direct sunlight. Clean these silicone molds with soapy water for the finished product, once removed from the mold, there will be rough edges that need to be polished and polished, but polishing is not performed until the casting is completely hardened. Note: The maximum temperature that the mold can withstand is 220C (428F). specification: Color: transparent Material: Silicone prompt: Cleaning: Please wipe the resin mold with alcohol first, and then wipe with a soft cloth. Storage: Please store resin jewelry molds away from direct sunlight and dust. Release agent: If there is a release agent, you can use it. If you don't do this, you can use a baby wipe or a small drop of soapy water and a small amount of water as a release agent, and then beat it to the end. Package Contents: 1 or 4 or 6x mould