Features: 1. This system is a device that controls the engine to stall. When your car is parked, it can protect the car from being stolen; or when you are forced to leave the car by others, it can also protect the car from being stolen. It keeps the car safe even when you're away from it. 2. This system has the function of controlling the engine circuit and oil circuit, and the automatic flameout time is 1 minute and a half or 3 minutes. Warning: It is recommended to install the LED status indicator in a hidden place to prevent the on/off status of the anti-robbery device from being detected by intruders. Description of LED Status Indicators: LED display Number of flashes Status Red/green traffic lights flash alternately to indicate that the engine is on Red red light flashing Activate the first stage of anti-grab Red and red lights are always on, activate the second stage of anti-robbing Green The green light is on for 2-4 seconds The remote control transmits a signal (the signal is recognized) Green Green light is always on Learning code mode off off system off How to operate 1. Start the remote control Press and hold the remote control button for 8 seconds until the indicator light is on, then the remote control enters the working state and the indicator light starts to flash intermittently. 2. The remote control is turned off Press and hold the remote control button for 8 seconds until the indicator light does not light up. At this time, the remote control is turned off and the working status indicator light does not flash, and only the manual button can work. 3. Shut down the system Press the emergency release button 5 times to turn off the protection system. This action confirms the owner and allows the engine to start. With this emergency release, the car works normally 4.driving identification Before entering the car, turn on the remote control, the LED indicator light will be on for 4 seconds, indicating that the host system has recognized the signal sent by the remote control, and then the LED indicator light will flash alternately with traffic lights to confirm the reception of the signal and display the status of the car normally. 5. automatic anti-robbery If you are kicked out of the car and haven't had time to do any protection operations, the device will automatically do it for you. At this time, the car will automatically turn off after 1 minute and 30 seconds (Phase 1), or 3 minutes (Phase 2). 6. learning code method First, temporarily release the system, press the emergency release button 5 times and the LED indicator turns green, long press the emergency release button until the green light flashes quickly, press the button on the remote control, the LED indicator flashes red and green once, indicating that the remote control is successfully learned. This operation allows you to learn 2 remotes at the same time. The learning time for each remote control should not exceed 2 seconds. Once the programming is successful, please open the system protection device. installation method Install the main unit in a hidden position in the car, away from moving parts. LED status indicators are installed in places that are not easily found. Emergency contact switches must also be installed in concealed locations. The red/black wire is connected to the 85 port of the relay, 86 is connected to the positive pole, and the port 87a is connected to the circuit of the original car flameout device. The black/white wire is connected to the 85 port of the relay, the 86 is connected to the positive terminal, and the port 87 must be connected to the oil pump circuit. Product parameters: Material: ABS + electronic components Model: LB-AR028 Compatible Models: All Models Alarm mode: oil cut, power cut Alarm range: 50 meters Supply voltage: 12-15 V Operating temperature: 100C Frequency: 433.92Hz Alarm response time: 0.5 Alarm Loudness: 0.5 Battery Information: Battery Type: button battery Subtype: CR2032 Battery material: 12V lithium battery Type: one-way alarm Category: Anti-theft Alarm Alarm Trigger Description: Vibration packing list: Control unit*1, remote control*2, LED connection cable*1, cable*2, user manual*1