1.54inch e paper Module (B) 200 x 200 E ink Display Screen for Raspberry Pi

74,00 €
doručenie ZADARMO

1.54inch e paper Module (B) 200 x 200 E ink Display Screen for Raspberry Pi

  • Značka: Unbranded
Predáva:

1.54inch e paper Module (B) 200 x 200 E ink Display Screen for Raspberry Pi

  • Značka: Unbranded
Cena: 74,00 €
Predáva:
74,00 €
doručenie ZADARMO

Na sklade

Akceptujeme nasledovné platobné metódy

Popis

Features 1.This E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. 2.No backlight, keeps displaying last content for a long time even when power down. 3.Ultra low power consumption, basically power is only required for refreshing. 4.SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. 5.Comes with development resources and manual (examples for Raspberry Pi/STM32). Specification Description: This E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features: No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32). Specifications: Operating voltage: 3.3V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 48mm x 33mm / 1.9" x 1.3" Display size: 27.6mm x 27.6mm / 1.1" x 1.1" Dot pitch: 0.138 x 0.138 Resolution: 200 x 200 Display color: red, black, white Grey level: 2 Refresh power: 26.4mW(typ.) Standby power: < 0.017mW Viewing angle: > 170° Package weight: 30g Interfaces: VCC: 3.3V GND: Ground DIN: SPI MOSI pin CLK: SPI SCK pin CS: SPI chip selection, low active DC: Data/Command selection (high for data, low for command) RST: External reset, low active BUSY: Busy status output, low active Package List: 1 x 1.54inch e-Paper Module (B) 1 x XH2.54 8Pin Cable (20cm / 7.9in) Note: If you want more tutorials and instructions about this product, please contact us, we will send related information to you. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List
  • Fruugo ID: 271409577-601708553
  • EAN: 9370907476699

Informácie o bezpečnosti produktu

Prečítajte si informácie o bezpečnosti produktu špecifické pre tento produkt uvedené nižšie

Nasledujúce informácie poskytuje nezávislý maloobchodný predajca tretej strany, ktorý predáva tento produkt.

Bezpečnostné štítky produktu

CE Mark
Bezpečnostné upozornenia: This product does not require safety information.

Dodanie a vrátenie

Odoslané do 10 dní

  • EXPRESS: Zadarmo - Doručenie medzi št 23 októbra 2025–pi 24 októbra 2025 - Zadarmo - Najrýchlejší

  • STANDARD: Zadarmo - Doručenie medzi št 30 októbra 2025–št 06 novembra 2025 - Zadarmo

Doručenie od Čína.

Snažíme sa, aby sme výrobky, ktoré si objednáte, doručili celkom v súlade s vašou špecifikáciou. Ak by ste však dostali neúplnú objednávku alebo iný tovar ako ten, ktorý ste si objednali, alebo existuje nejaký iný dôvod, prečo nie ste s objednávkou spokojní, môžete objednávku alebo niektoré produkty z nej vrátiť a za tovar dostať plnú náhradu. Pozrite si všetky pravidlá vrátenia