The VL53L0X is a time-of-flight ranging system integrated into a compact module. This board serves as a carrier for the VL53L0X, and it is recommended to review the VL53L0X datasheet before use. The VL53L0X utilizes ST's FlightSense technology to accurately measure the time it takes for emitted pulses of infrared light to reach the nearest object and reflect back to the detector, functioning as a miniature, self-contained lidar system. Ranging data is accessible via the sensor's I2C interface, which is also used for configuration. The sensor includes two additional pins: a shutdown input and an interrupt output. The VL53L0X is a high-performance IC; however, its small, leadless LGA package can be challenging for typical students or hobbyists to handle. It operates at a recommended voltage of 2.8 V, which may complicate interfacing with microcontrollers running at 3.3 V or 5 V. This breakout board simplifies integration while maintaining a minimal footprint. Key features: - Compact time-of-flight ranging system - Regulated 2.8 V output providing up to 150 mA for external components (can be used as 2.8 V input if internal regulator is bypassed and VIN is disconnected) - VIN: 2.6 V to 5.5 V power supply; SCL and SDA level shifters pull I2C lines high to this level - GND: Ground connection; I2C control source must share common ground - SDA: Level-shifted I2C data line (HIGH = VIN, LOW = 0 V) - SCL: Level-shifted I2C clock line (HIGH = VIN, LOW = 0 V) - XSHUT: Active-low shutdown input; pulled high by default to enable the sensor. Driving low places sensor in hardware standby (not level-shifted) Color: Purple and black Material: Metal Dimensions: 25 x 12.2 mm Package Includes: 2 x Ranging Sensor Module Note: The package includes only the items listed above. Other products are not included. Due to lighting and display differences, the item color may vary slightly from the images. Measurement may vary by +/- 1-3 cm.