Item Type: Adapter Card Material: PCB Hardware Requirements: a Motherboard with MSATA Interface, a Notebook or an Adapter Card Support MSATA Interface SSD1,Made of high quality PCB material, and the adapter card is durable, has a long service life, and the quality is guaranteed. 2,Use high speed signal enhancement technology, and there is no need to worry about the adapter card is easily damaged. 3,Just plug and play, and easy to operate, and used with high speed, low latency and low power consumption. 4,After the adapter card and the MSATA SSD are connected, connect to the SATA laptop optical drive bracket to expand the laptop capacity. 5,Adopts SATA3.0 wiring, which can run quickly, and is convenient to transfer the MSATA hard disk to a standard 2.5inch SATA port for use on a computer.1. Because the appearance of the MINI PCI E slot and the MSATA slot are the same, but the signals inside are not shared. This riser card can only be used for MSATA hard disks, not MINI PCI E hard disks. Be sure to confirm the slot before purchasing. 2. The color of the outer shell and the style of the PCB circuit board inside may be changed depending on the delivery batch, but the function can be guaranteed to remain unchanged. 3. The adapter card only changes the interface form of SSD, and does not change any performance of your hard disk. What is the original hard disk parameter, and the adapter card is added, the output interface performance will not change.8 x Screws 1 x MSATA to SATA3.0 Adapter Card Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.