M.2 and SATA Duplicator It functions greatly as an Offline Duplicator to clone critical data between 2 SSDs quickly without a computer. And can be used as a Dual-Bay Docking Station to help expand storage capacity with NVMe M.2 SSD and 2.5""/3.5"" SATA hard drive. NOT support SATA SSD M.2. Products Feature Capable of PCIe Gen 3x2 NVMe 1.3 M Key & B+M Key M.2 SSD and SATA 3.1 HDD/ SSD. USB3.2 Gen2 SuperSpeed 10Gbps USB-C interface for upstream, backward compatible. TRIM and UASP are supported for boosting efficiency. As an enclosure, multi-size M.2 SSD is compatible: 42/ 60/ 80mm. NVMe M.2 SSD and SATA HDD/ SSD can be functioning simultaneously. Offline clone is bi-directional via the mode switching. Clone progre will be indicated by LEDs. High thermal-conductivity sleek aluminium-housing for heat diipation and long-lasting usage. DC 12V/2A power adapter is provided for the high-consumption situation. Tool-free extraction design, easy to disaemble and aemble. Easy and Flexible Offline Clone You simply plug the NVME SSD and SATA hard drive into the ports, and then click 'Clone' for 3 seconds. This will quickly clone all files from 'A' to 'B'. The LED status indicator shows how far the cloning proce has progreed. Notice: Clone orientation is optional. Make sure the target disk has a larger capacity than the original disk. High Speed and Performance With its JMS581D Chip, the dual-bay Docking Station enables 10Gbps super-speed data transfer. Most M2.NVME SSDs can read at 974Mb/s and write at 986Mb/s on your Macbook. As tested, it took about four to five minutes to clone a 256GB m.2 SSD into a 6TB one. Compatibility Compatible with M.2 NVMe PCIe M key, PCIe B&M key SSD and AHCI/SATA 2.5"/3.5" SSD&HDD. Note: NVMe M.2 and SATA SSD are not included. This applies to solid state drivers of sizes 2242, 2260, and 2280. Spec Colour: Black Dimension: 102mm x 67.5mm x 14.5mm Materials: Aluminium-Alloy Cover and ABS Frame Upstream: USB-C Female Downstream: PCIe/NVMe M.2/SATA III Input: 12V/2A Cable Length of Attached Cable: 30cm Packaging Content 1 x M.2/SATA Duplicator 1 x Rubber Mount 1 x Aluminium Heat Exchanger 2 x Silicone Thermal Pad 1 x USB-C 10Gbps Cable with USB-A Adapter 1 x 12V/2A Power Adapter Human Friendly Design Versatile M.2 NVMe and SATA Enclosure Adapter support Smooth plug and unplug. No need to use any tools or screws. Hard disk is protected by aluminum alloy material design, which diipates heat quickly.