<p>The CJMCU-2551 is a fault tolerant high-speed CAN device that acts as a CAN protocol controller and a physical bus interface. The MCP2551 provides differential transceiver capability for the CAN protocol controller, which fully complies with the -11898 standard, including 24V voltage requirements.</p> <p>Typically, each node on the CAN system must have a device that converts the digital signal generated by the CAN controller into a signal suitable for bus transmission. </p> <p>It also adds buffers between the CAN controller and the high voltage spikes on the CAN bus, which may be generated by external devices.</p> <p>Support 1MB \/ S operating rate.</p> <p>Meet the -11898 standard physical layer requirements.</p> <p>Suitable for 12V and 24V systems. Slope External Control, Reduced RFI.</p> <p>Automatically detects a ground fault at the TXD input.</p> <p>Power-on reset and voltage event undervoltage protection.</p> <p>No power-up node or undervoltage does not affect the CAN bus.</p> <p>Low current standby operation.</p> <p>Up to 112 nodes can be connected.</p> <p>Material: Metal</p> <p>size: 18 x 15mm</p> <p>Colour: Purple</p> <p>Quantity: 1 pcs</p> <p>Package Contents: 1 x CAN Communication Protocol Controller Bus Interface Module</p> <p>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>