1. Plexiglass outer shell, beautiful design and generous, key touch texture is good, press the button to set the output voltage, eliminating the need to use a knife. The button can control the output to turn off and on, and can set the product power-on default is ON or OFF. LCD can display input and output voltage, output current, output power. Input reverse polarity protection, reverse connection will not burn 2. High efficiency over 93%, current, small heat, output voltage 1.2-32V arbitrary regulation, constant current value of about 0-4.5A adjustment, suitable for office power, high-power LED constant current drive, lithium battery charging and so on 3. There are two buttons on the left side of the module: IN/OUT, ON/OFF: IN/OUT button to switch the input voltage and output voltage display, long press to switch the output current and output power display; ON/OFF button control output ON or OFF, Long press to set the time the default output state is ON or OFF. 4. The right side of the module has two buttons: '+' and '-'. Press the '+' button to increase the output voltage by 0.05V. Press and hold it to increase it continuously. Press and hold it again for a continuous slow step increase of 0.1V and 1V. '-' button, the output voltage is reduced by 0.05V, long press can continue to reduce, and then long press to reduce by 0.1V and 1V. 5. Input voltage: 6.5-36V (input voltage less than 6.5V, current is not accurate, less than 5.5V, LCD display is not normal); Output voltage: 1.2-32V, factory default output 5V. Output current: Can work stably at 3.5A for a long time, and can reach about 4.5A under enhanced heat dissipation (adjustable limit current is about 4.2-4.5A); Output power: natural heat dissipation 50W (less than 3.5A), enhanced heat dissipation 75W Voltage display: resolution 0.05V, range 1.2-32V, accuracy ofabout 0.1V (accuracy demanding carefully shot ) Current display: resolution 0.005A, range 0-4.5A, accuracy 0.05A (precision for those who require accuracy ) Conversion efficiency: about 94% Working current: about 30mA Reverse input protection: Yes Anti-backflow at the output end: None (If the battery is , on the module and then connect the battery, and that the battery voltage is lower than the output voltage; if the condition is required, connect the anti-backup diode to the positive side of the output string) Short circuit protection: Yes Size: length x width x height 70.5 x 48.4 x 28mm Weight: 62g Model Number:-J5X Current Type:DC color:Photo color Material:plastic Package Contents: 1 x DC Converter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.