Specifications: Battery Type: 1x 9V battery (Not Included) Item Weight: 03kg Hardware Version: OEC-T5 Software Version: EL-50448 Material Type: ABS Color: Black and Orange How to use EL 50448 TPMS Activation : Step 1: Enter leaning mode Set the gearshift lever to "P" Put the ignition switch to ON Enter the interface of tire pressure display by DIC DIC shows "Press Set / Ctrl to re-learn" Press Set / Ctrl The turn signal light is on for 3 seconds and the horn beeps twice to enter the learning mode Step 2: Read tire pressure sensor information Start from the front-left wheel, Place the EL-50448 antenna up against the valve core, close to the rim and tire sidewall Press the Start Button The tire pressure sensor information is successfully read when the horn bleeps once Step 3: Same to read other tire pressure information Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels. Turn signal lights turn on for 3 seconds and the horn bleeps twice when the learning is complete. Tire Pressure Monitor Sensor TPMS Activation EL-50448 OEC-T5 For vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special EL-50448. Packaging includes 1x EL-50448 Tire Pressure Reset Instrument Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.