REX-C100 digital thermostat temperature controller SSR output K type thermocouple sensor 48 x 48 SSR 40DA solid relay sensor Specifications: 1.Thermostat Note: This thermostat can only be connected to K-type thermocouples Measuring accuracy: ±0.5/FS Cold-end compensation tolerance: ±2 ( can be modified by software in 0/50 ) Resolution: 14 bit Sampling cycle: 0.5 Sec Dimensions:48 x 48 x 110 (mm) ±0.2mm Process value (PV), Setting value (SV) Output, No alarm function Self-tuning control output: contact capacity 250V AC 3A (resistive load Contact capacity of output: 250V AC 3A (resistive load) Setting value (SV): identical to measuring range (PV) Proportional band (P): 0/full range (ON/OFF control when set to 0) Integral time (I): 0/3600 sec (No integral action when set to 0) Derivative time (D): 0/3600 sec (No derivative action when set to 0) Heat-reset proportional cycle: 1/100 sec temperature range: 0 to 400 Insulation resistance: >50M ohm(500V DC) Insulation resistance: 1500V AC/min Power Consumption: 10 VA Service environment: 0/50, environment with no corrosive gas 30/85/ RH K Type Probe Sensor : Cable Length: 1M Sensor diameter:4.5mm Temperature rang :0-600 Internal Insulation: Fiberglass External Shielding: Insulated Shielding SSR 40DA Solid state relay 1.Output Current:40A 2.Input Voltage:DC 3-32V 3.Output Voltage:24-380V AC 4.Output Voltage Range:Standard Type