1. Adopt for CyclonellEP2C5T144 chip as the core minimum system, and embed FPGA into the actual application system;2. Complete simple logic control, data acquisition, signal processing, mathematical calculation and other functions;3. All pins of the core board FPGA chip are led out, and the board can be directly inserted into the application board,The 5V power supply on the board can be introduced through socket or array;4. Very size: 71.9 (mm) x 51.7(mm)5. Simple and convenient installationHardware configuration:1. Onboard EP2C5T144 chip2. Configure EPROM chip to adopt EPCS4, with the size of 4Mbit3. On board 50M active chip crystal oscillator (crystal oscillator is on the back of the board)4. The power supply adopts the port power socket and single 5V power supply5. The board is equipped with power indicator and reset switch6. There are three chip on board, which can be used for LED test experiments, and more experiments are completed by using leads7. All IO ports and clock pins are led out through the pin array, and any memory and peripherals can be expanded through these interfaces8. The board uses high-quality tantalum capacitor as power filter9. Support the opening of Niosll embedded CPUColour:blueMaterial:PCB+metalPackage Contents:1 x EP2C5T144 core board4 x needleOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.