This product is a high-performance RISC-V development board based on the ESP32-P4, featuring a dual-core and single-core architecture. It supports a wide range of human-machine interface interfaces, including MIPI- (integrated image signal processor) and MIPI-. It also supports common peripherals such as SPI, I2S, , LED PWM, MCPWM, , ADC, UART, and TWAI. It also supports USB OTG 2.0 HS, Ethernet, and SDIO Host 3.0 for high-speed connectivity. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to data and operational security. The ESP32-P4-WIFI6-DEV-KIT is designed for high-performance and high-security applications, fully meeting the demands of embedded applications for human-machine interface support, edge computing capabilities, and 10G connectivity. This is a high-performance MCU equipped with RISC-V 32-bit dual-core and single-core processors. 128KB ROM, 16KB LP ROM, 768KB L2MEM, 32KB LP , 8KB TCM Powerful image and voice processing capabilities, including image and voice processing interfaces such as a JPEG codec, pixel processing accelerator (), image signal processor (ISP), and 264 video encoder. The chip package includes 32MB of PSRAM, and the module integrates 16MB of NOR Flash. Common peripheral interfaces such as MIPI-, MIPI-, USB 2.0 OTG, Ethernet, SDIO 3.0, an SD card slot, microphone, speaker terminals, and an RTC battery terminal are provided on the board. A 2x20 pin header is provided on the board, providing 28 remaining programmable GPIOs. Security mechanisms include secure boot, flash encryption, hardware encryption accelerator, and hardware random number generator. Hardware access protection is also supported, enabling access privilege management () and privilege separation. The IPS fully laminated tempered glass panel boasts a 178 wide viewing angle and supports ten-point touch, ensuring clear images and an excellent visual experience. Highly integrated and powerful: The development board utilizes the ESP32-P4 chip, an onboard ESP32-C6 processor, and 16MB of Nor Flash. A reserved PoE module port provides flexibility in powering the development board. Using a PoE module, you can achieve PoE (PoE) power over Ethernet. Simply connect a PoE device to with a single Ethernet cable to connect the ESP32-P4-WIFI6-DEV-KIT and power it. This product does not include a PoE expansion module; it must be purchased separately. Supports AI voice interaction: Supports mainstream AI platforms and can access large online model platforms such as for Doubao and for . Color:As Shown Material:plastic Package Contents: 1 * ESP32-P4-Module Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.