1、The infrared sensor randomly rotate around the turntable and position at any angle of the turntable, which allows the turntable to rotate more than 180° or less than 180° at a time, and the number of adhesive tape also varies with the angle. 2、Selectable automatic/manual startup function. 3、With great advantage to cut especially narrow tape, can cut 3mm tape. 4、The cut tape is hung around the turntable, leaving enough room for the hand to take the tape, so it is very convenient and accurate. 5、Push the button once and the turntable will rotate for half a circle. The quality inspection spacing of each piece of tape can be adjusted so that pushing button once can generate multiple pieces of tape on the turntable, which is convenient for multiple people to use at the same time. 6、The blade is located inside the safety cover, plus the safety switch design, will not injure the operator. 7、Installation tape without roller design, there are no restrictions on the inner and outer diameter of the tape. 8、Control length by mechanical limit so that the length of each piece of tape is almost exactly the same. Item Type: Automatic Tape Dispenser Cutting Length: 15-70mm Applicable Tape Width: 3-25mm Applicable Tape Roll Inner Diameter: No limit Applicable Tape Roll Outer Diameter: No limit Cutting Length Error: ±0.5mm Dimensions (WxHxD): 126x150x258mm / 4.96x5.91x10.16in Applicable Tape Type: High temperature tape, transparent tape, for mylar tape, etc. 1 x Automatic Tape Dispenser 1 x Manual