Use LCD to display satellite signal intensity Built-in signal alert buzzer Features LCD backlight, buzzer, and attenuation control function DC pass to LNB ATT increasing key: If the incoming signal is too strong (thermometer scale shows max and signal strength value shows 97), attenuation can be enabled to reduce the incoming signal to a lower level Four-step attenuation available Frequency range: 9502150 MHz Supply voltage: 1318 V DC Input level range: -40 dBm to -10 dBm Operating temperature: 040 C Impedance: 75 ohms Connection instructions: Connect a jumper cable from the LNB to the "Satellite" port on the digital SATFINDER Connect the cable from your satellite receiver to the "Receiver" port on the digital SATFINDER Note: Product appearance, color, and printed text may vary slightly between batches; these variations do not affect performance Color: Blue Material: Plastic Size: 130 x 65 x 27 mm Package contents: 1 x Satellite Signal Meter (Model: -95DR) Note: The package includes only the items listed above. Other accessories shown in images are not included. Lighting and display settings may cause slight color differences between the product image and actual item. Measurement error allowed: 13 cm.