<p>1. Can use PWM control</p> <p>2. It can carry a maximum current of 10A, with a -to- value of 15A</p> <p>3. Wide power supply control signal 3V-20V</p> <p>4: stable performance</p> <p>5: Small size</p> <p>Module power supply voltage is: 3V-20V</p> <p>Signal terminal supply voltage: 3V-20V</p> <p>Support duty cycle range: 0-100%</p> <p>PWM frequency range: 400-2K</p> <p>The maximum -to- current is 15A, the current above 8A is recommended to increase auxiliary heat dissipation, and the maximum working current is 10A</p> <p>Size: 44mm x 26mm x 12mm</p> <p>Weight: 13g</p> <p>Precautions:</p> <p>1. The power supply of the driver must not be reversed. It is recommended to connect a 15A fuse in series at the power interface. If the voltage is reversed, power-on may burn module.</p> <p>2. It is recommended to use 400HZ to 2KHZ for PWM.</p> <p>3. When the motor is commutated, the motor needs to be stopped or braked first, and then commutated (to avoid a large instantaneous current that the current). The or stopping time of the motor should be longer than 0.5s, otherwise the module may be burned.</p> <p>Colour:black</p> <p>Material:PCB+Metal</p> <p>Package Contents:</p> <p>1 x 10A high-power DC motor drive module</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>