220V Body Sensor Microwave Sensor Switch For Moving Objects 1. Operating voltage: 220V-240VAC 2. Power load: 1200W 3. Power frequency: 5060HZ 4. Time delay: 10 seconds~30 minutes 5. Frequency system: 5.8Hz+-75MHz CW radar 6. Transmission power: 0.2mW 7. Detection angle: 360 degrees 8 Installation method: indoor, ceiling mounting 9. Light source control: 10-2000LUX 10. Detection distance: 2-10m 11. Size: 95x95x42mm 12. Is a motion detector with adjustable sensitivity and light detection time setting 13. Based on the Doppler principle and radar technology with antenna and high performance microchip 14. Can penetrate objects, so concealed installation is an option 15. Not affected by temperature, such as infrared induction will be at a temperature of about 37 degrees will be time-sensitive, such as summer, indoor, outdoor, or other operating environment may be higher than this temperature 16. Infrared induction, need to pass through the lens, induction range angle is small, the blind area is large, radar induction almost no blind area 17. Infrared induction will be affected by air dust, dust will affect the induction distance 18. Load power: 600W (resistive load, incandescent lamps and other resistive appliances) 300W 19. Interface: 3 pole pluggable port (N, L, L), 1.5mm2 cable 20. Do not reverse the zero and fire wires, otherwise some equipment may not work