In-Circuit programming target chip Online/offline programming mode Backup flash data of target chip (Ilf the target chip is not flash protected) Backup offline flash data of Nu-Link dongle (if offline data has been unprotected) Write software serials number (SN) to target chip Limit the maximum programming count. Data encryption for online/offline programming. Batch mode for online/offline programming. 2 Preparing for ICP Programming Tool 2.1 System Requirements: The hardware and software requirements for installing the ICP Programming Tool system are as follows: PC/AT compatible machine with Pentium or higher CPU XVGA(1024x768) color monitor At least 512M RAM for best performance At least 20M free disk space Windows 2000/XP/Vista/7 2.2 Hardware Installation: Step 1: Plug USB cable into the USB port of the ICP Programming Tool board. Step 2: Connect the ICP Programming Tool board with ICE interface of DEV board. 2.3 Software Installation: Please run the installer package to install the software. Due to different product batches, the appearance may vary, which does not affect the use. Colour:As Shown Material:Plastic Package Contents: 1 * NuMicro ICP programmer Kit