<p>100% New and high quality.</p> <p>Small body and stable performance.</p> <p>This module is programmable and can perform thousands of functions.</p> <p>The operation is stable and reliable.</p> <p>The built-in synchronization circuit can effectively the long-term operation of the module.</p> <p>Function:</p> <p>1. Turn on the power, relay 1 is closed after N seconds of closure; then relay 2 is closed after N seconds of closure.</p> <p>2. Turn on the power, relay 1 is turned off after N seconds of closing; then relay 2 is off after N seconds, and then cycles.</p> <p>3. When the power is turned on, relays 1 and 2 are not activated. When there is a signal or the button is triggering, relay 1 is turned off after N seconds is closed; then relay 2 turns off after N seconds, and then turns off until trigger, repeating the same action.</p> <p>By programming signals 1,2, any control of relays 1 and 2 can be performed.</p> <p>4. When signal 1 has a signal, relay 1 is closed and relay 2 is off; 5. When signal 2 has a signal, relay 1 is off and relay 2 is closed.</p> <p>6. Only the NPN signal sensor can be connected, and the sensor signal can be programmed to carry out any relay monitoring.</p> <p>7. When signal 1 has a trigger, control relay 1; When signal 2 has a trigger, control relay 2.</p> <p>8. Turn on the power, control the engine to turn for N seconds, then turn N seconds, and cycle.</p> <p>9. When signal 1 has a signal, the motor is controlled to turn forward; When signal 2 has a signal, the motor turns.</p> <p>Condition </p> <p>Model: FX1N-14MT</p> <p>Power Supply: 10-28VDC</p> <p>Maximum memory: 8000 steps</p> <p>Colour: Black</p> <p>Material: Plastic</p> <p>Package Contents:</p> <p>1 * Industrial Control Board</p> <p>1 * housing</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>