<p>BRT LB02G (Upgraded New Version)</p> <p>If you need low cost no battery inside type, pls click:2\/3\/4-wire 0-20mA 0-10V Signal Generator BRT LB01GNB</p> <p>Max. Output range: max. -10V to 10V., 2\/3\/4-wire 0-22mA sink or source signal. Voltage output can be exactly 0.00V</p> <p>Output range can be 0-20mA, 4-20mA, 0-22mA, 0-1V, 0-5V, 0-10V, 0-2.5V, 0-3.3V, -5V to 5V, 1-5V, 2-10V, etc. switchable and adjustable.</p> <p>Display modes can be: actual current\/voltage signal value display, 0.0-100.0(%), 0.0-50.0 (Hz), switchable.</p> <p>User can set 9 x fast signal output points, more convenient to do debugging.</p> <p>Have battery capacity status indicator, and battery voltage value display function.</p> <p>Support 24V operating power supply via wiring terminals and 5V from USB port, can be used in indoors or outside industrial site.</p> <p>1000mAH 3.7V re-chargeable battery embedded inside, *Automatic stopping recharging battery when battery has been fully ..</p> <p>Output accuracy can be calibrated by user, precision 0.01V, 0.01mA output and LED display output signal value accurately.</p> <p>Adjusting steps can be fine adjustment or rough adjustment, switchable.</p> <p>Have short-circuited protection circuits and polarity reverse connection protection circuits in Brightwin signal generator.</p> <p>Refined user-friendly external , refined accurate encoders' knob to adjust output signal, more slim size.</p> <p>Its default output range is 0-10V, 0-20mA, user can adjust it to output -10V to -10V, 4-20mA, etc., output ranges.</p> <p>Output accuracy can be calibrated by user.</p> <p>Colour: black + gray</p> <p>Material: plastic</p> <p>Package Contents:</p> <p>1 * Signal Generator</p> <p>1 * USB Cable (random color, don't accept the specified color)</p> <p>4 * Alligator Clip</p> <p>1 * Screwdriver (random color, don't accept the specified color)</p> <p>1 * English instruction manual</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>