[Simple to Use]: The temperature range for this temperature controller is -40 to 110°C. Easy to set and adjust, featuring an HD LCD display and 4-button interface. This is a relay-based temperature controller; an external power supply must be connected for the load. [High Current 30A Relay]: Supports high power applications up to 220V 30A. Suitable for use with high-power equipment such as refrigerators, brooders, incubators, fermenters, greenhouses, and more. Connect the power supply and heating or cooling devices, place the sensor probe, set the desired temperature, and the unit will operate efficiently. [Heating/Cooling Function]: Heating Mode (H): When the detected temperature is less than or equal to the set temperature minus hysteresis, the relay activates and the heating device turns on. When the detected temperature reaches or exceeds the set temperature, the relay turns off and heating stops. Cooling Mode (C) operates on the same principle for cooling devices. [Delay Start & Temperature Correction Function]: Delay Start (OPH): After a heating or cooling cycle ends, the system begins timing period T. Once T is greater than or equal to OPH setting, the next heating or cooling cycle can begin. Temperature Correction (OFE) range: -10.0 to +10.0°C. Over long-term operation, minor temperature deviations may occur and can be corrected using this function. Actual temperature = measured temperature + correction value. [High Temperature Alarm Function]: When the actual temperature reaches or exceeds the preset alarm threshold, the system triggers an ble and visual alarm and automatically disconnects the relay. Press any button to silence the alarm. Usage Steps: 1. Connect the sensor to the controller. 2. Power the controller. 3. Set start temperature, stop temperature, and temperature correction value. 4. Disconnect power. 5. If required, connect the load with power supply to the relay output terminal. 6. Reconnect power to the controller. 7. Test and begin operation. Color: As shown Material: Plastic Package Contents: 1 x XY-DT01 Digital Temperature Controller Note: Lighting and display differences may cause slight variations between the product color in images and the actual item. Measurement tolerance: ±1-3 cm.