and high quality RC aircraft finder alarm for airplane, helicopter, Parkflyer, tracer, glider Connect the alarm between the servo and the receiver, functioning as a servo extension cord Turn on your transmitter to hear two beeps Avoid moving control sticks or turn off the transmitter; a continuous beep will sound after one minute and stop when the transmitter is turned on or control sticks are moved If the continuous beep is ignored for approximately 2 minutes, it changes to a louder alert tone Disconnect the alarm from the receiver to disable the alarm Ensure correct polarity before turning on the transmitter Features: - and high quality - RC aircraft finder alarm for airplanes, helicopters, Parkflyers, tracers, and gliders - Connects between servo and receiver as an extension cable - Emits two beeps upon transmitter activation - Triggers continuous beep after one minute if no input is detected or transmitter is off - Alert tone increases in volume after 2 minutes of inactivity - Must be disconnected from receiver to turn off alarm - Requires correct polarity connection Specification: Condition: Item Type: Aircraft Finder Tracer Alarm Using Instruction: Connect the alarm between the servo and the receiver, acting as a servo extension cord Turn on your transmitter and listen for two beeps Do not move any control sticks or turn off the transmitter; a continuous beep will activate after one minute and cease when the transmitter is turned on or sticks are moved If the beep is ignored for about 2 minutes, the sound becomes a louder alert tone To stop the alarm, disconnect it from the receiver Always verify correct polarity before powering on the transmitter Package Includes: 1 x Aircraft Finder Tracer Alarm