1. 150CH 5.8Ghz analog signal, 1500 scans cover all bands. 2. Resolution 640*480 30fps. 3. Mushroom RX antenna, omnidirectional pointing, strong transmission signal. It can greatly improve the stability and distance of 5.8G image to video transmission. 4. Can display frequency spectrum, to check the signal strength of antenna or transmitter. 5. Support dual display on smartphone, can be used as VR goggles. Note:If you use a 2.4G remote control, some remote controls may interfere with the 5.8G signal after increasing the frequency through the 2.4G frequency band. Using a high-frequency band frequency of 5945MHz for video transmitters can avoid this problem. Or keep the video receiver away from the 2.4G remote control. Please calibrate it in open area, and keep away from transmitter more than 30m. Long the menu button and power on receiver, enter into calibration mode. Support OTG cable connect to android smartphone or tablet. Single Antenna FPV receiver for Android Tablet PC Monitor. Specifications: Frequency:5645MHz-5945MHz Resolution:640x480 30fps Working Current:USB 5V 190mA Connector:RP-SMA USB:Type-C Working Temp.:-10-65℃ Weight:26g Note: 1. Do not support IOS system. 2. Some smartphones should open the otg function before use. 3. Some players have complained that it has the issue of flicker or short distance. After testing in open area, the reason has been found to be its high scanning accuracy,that the transmitted frequency is reflected by wall indoors and make the real frequency detected by receiver higher than it should be. So it is quite important to operate it in an open area and keep the receiver and transmitter more than 30m. Color:As Shown Material:plastic Package Contents: 1 x 5.8Ghz VTX OTG Receiver Set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.