For Raspberry Pi Pico 2 W is a low-cost, high-performance microcontroller board with flexible digital interfaces. Upgraded hardware from Pico 2 with wireless communication and onboard antenna, featuring 2.4GHz 802.11n Wi-Fi and Bluetooth 5.2. Development board uses RP2350 microcontroller chip designed by Raspberry Pi. Adopts dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, with flexible clock running up to 150 MHz. Onboard Infineon CYW43439 wireless chip supports Wi-Fi 4 and Bluetooth 5.2. 520KB of SRAM and 4MB of on-board Flash memory. Castellated module allows soldering directly to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 multi-function GPIO pins. 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels. Temperature sensor. 12 Programmable I/O (PIO) state machines for custom peripheral support. Color: Multicolor. Material: PCB. Package Contents: 1 x Microcontroller Development Board 1 x USB Cable 1 x Pin Header USB cable color is random. Slight variations in printing or appearance may occur between batches; these do not affect functionality. Color may vary slightly due to lighting or display differences. Measurement tolerance: ±1–3 cm.