Badu Bettar 1.5CV-Tri

Plastic Badu Bettar plastic pumps from the prestigious Speck were specially designed for pool water circulation in combination with the corresponding filtration equipment. The plastic parts that come into contact with the middle are mostly made of reinforced polypropylene PP TV 40, and therefore, excellent corrosion resistance to the pool water and the means of water treatment. The pump body does not contain grafts. Thus, the body is also recyclable. It can be installed up to 3 meters below water level.The engine axis acts simultaneously as a pump axis on which it is subject to turbine. As a fastener for this, it serves a front bellows that is based on the turbine plastic cube. With it a safe separation is obtained between the pool water and the Electric motor. Thanks to the Construction building, the pumps require little space. They are triggered with three -phase or alternating current motors. In the pump carcass is integrated a prefilter basket that keeps the thicker impurities inside the pump.Description:Badu Bettar pumps are manufactured in Germany and designed for the circulation of pool water in conjunction with an appropriate font installation. Monobloc Construction with a pre-filter basket.Emphasis:Engine axle is not in contact with water.Temperatures resistant up to 60 ° C.Corrosion resistant thanks to a 100% recyclable high performance synthetic material.Self-branches.Spectation.12m14m14T22m22T25m25TPower (CV)0.751.151.151.51.5twotwoCaudal (m3/h)12141422222525Connections (mm)50/5063/5063/6375/63Pot. ABS. P1 (W)7701,2501,0001,6501,8001,8502,000Pot. Rest. P2 (W)4508507501,1001,1001,5001,500Nominal int.3.26.03.8/2.27.85.5/3.28.16.4/3.7Max pressure. (PUB)2.5Protection indexIP54