Micro-USB Tiny AVR ISP ATtiny44 USB Tiny ISP Programmer Module 10 Pieces

USBtinyISP is designed compatible with AVR ,based on USB connector's ISP downloader. Officially supported by compatible with Arduino IDE and compatible usbtinyisp,we can burn compatible with Arduino bootloader onto chips, and practically program any Atmel AVR microcontroller by this powerful AVR ISP programmer. The Tiny ISP Programmer is able to provide the 5V power supply voltage to the board being programmed. If you want to power the board through the ISP you have to close the SJVCC jumper on the board. With this programmer you can upload sketches and burn the bootloader on any AVR based boards, including compatible with Arduinos. By uploading a sketch with an external programmer you can remove the bootloader and use the extra space compatible with your sketch. The compatible with Arduino ISP can also be used to burn the compatible with Arduino bootloader, so you can recover your chip if you accidentally corrupt the bootloader. Burning the bootloader is also necessary when you use a ATmega microcontroller in your compatible with Arduino, and you wish to use the bootloader to upload a sketch via the USB-Serial connection. Supports ATTiny45 and ATTiny85 chip compatible with arduino programming,etc. Supply voltage:5 V Microcontroller:ATtiny44 (datasheet) Connection with the computer:micro-USB Connection with the target board:ICSP Board size:23x14mm(approx) HOW TO USE: Connect the compatible with Arduino ISP to your compatible with Arduino board's ICSP headers. Make sure to match the orientation of the plugs by looking at the white dot on the corner of the connector Open compatible with Arduino IDE ,chose the hardware name downloaded in the"board" Select the "USBtinyISP" under "Burn Bootloader" menu Then bootlaoder begins to download and completed after 10 seconds(atmega328). Color:As Shown Material:PCB Package Contents: 10 * Miniature Encoder Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.